Producto Code: 0509.0623
One-component acetic cure silicone sealant recommended for sealing heating elements, joints in ovens, stoves, chimney filters, industrial furnaces, and engine gaskets. Resistant to weather, high temperatures, and engine oil. Features non-sag properties, cures at room temperature, and remains flexible for many years. Withstands weathering, UV rays, and temperature variations from -30°C to 315°C.
Surface Preparation
The surface must be dry, clean, and free of dust and oils. Remove all material residues, especially those not properly adhered to the surface (sand if necessary). Clean and degrease the surface with isopropyl alcohol and keep it dry before application. Do not use kerosene or gasoline for cleaning. For a better finish, it is recommended to apply masking tape to the sides of the joint where product contact is not desired. For applications on substrates other than those mentioned, it is recommended to perform a test to assess product adhesion and compatibility.
Application and Curing Time
Apply the product to the desired area and immediately smooth the surface. If masking tape is used, remove it before a skin forms. After use, leave a small amount of product above the nozzle to form a plug. For reuse, remove the plug. Once opened, reuse the product within one week. Clean tools before curing. Once cured, the product can only be removed mechanically.
Surface Preparation
The surface must be dry, clean, and free of dust and oils. Remove all material residues, especially those not properly adhered to the surface (sand if necessary). Clean and degrease the surface with isopropyl alcohol and keep it dry before application. Do not use kerosene or gasoline for cleaning. For a better finish, it is recommended to apply masking tape to the sides of the joint where product contact is not desired. For applications on substrates other than those mentioned, it is recommended to perform a test to assess product adhesion and compatibility.
Application and Curing Time
Apply the product to the desired area and immediately smooth the surface. If masking tape is used, remove it before a skin forms. After use, leave a small amount of product above the nozzle to form a plug. For reuse, remove the plug. Once opened, reuse the product within one week. Clean tools before curing. Once cured, the product can only be removed mechanically.
We are a global brand present for over 20 years throughout Latin America, offering products for the construction, crafts, furniture, automotive and consumer sectors.
By Duoeme
