Product Code: 0512.0273
Single-component adhesive based on hybrid polymer with modified silanes, designed for sink installation due to its high initial adhesion and non-corrosive effect on metals.
It is suitable for bonding and sealing porous and non-porous materials such as metals, concrete, stone, and ceramics. It features non-sagging properties and cures with atmospheric moisture, turning into a flexible and durable rubber.
Surface Preparation:
The surface must be dry, clean, and free from dust and oils. Remove all material residues, especially those not properly adhered to the layers (sand if necessary). Clean and degrease the surface with isopropyl alcohol and keep it dry before application. Do not use kerosene or gasoline for cleaning the surfaces.
Application and Curing Time:
Apply the product to the sink and immediately press it against the stone. Wait 6 hours before moving the sink and 24 hours before using it. After use, leave a small amount of product at the nozzle tip to form a plug. For reuse, remove the plug.
Storage:
Once opened, the product should be reused within one week. Clean tools before curing. After curing, the product can only be removed mechanically.
Usage Restrictions:
Not suitable for aquariums. Do not apply on plastics* such as polyethylene, polypropylene, nylon®, acrylic, or polytetrafluoroethylene. Do not use on items that will come into contact with food or be submerged continuously in liquids. Not recommended for glass façades or any structural bonding requiring high strength. Before painting, a preliminary test is recommended. Solvent- and oil-based paints may be harmful to the product. Do not use on expansion joints or building façades.
We are a global brand present for over 20 years throughout Latin America, offering products for the construction, crafts, furniture, automotive and consumer sectors.
By Duoeme
