PRODUTOS

  1. Home
  2. Silicone Neutro Alta Temperatura Ultra Preto 65g

Silicone Neutro Alta Temperatura Ultra Preto 65g

Cód Produto: 0510.0365

Domestic or industrial ovens, chimneys, barbecues, and greenhouses need a sealant that resists heat and offers exceptional durability. When it comes to sealing surfaces that are constantly exposed to high temperatures, the Oxima Unipega High Temperature Neutral Silicone is essential because it withstands temperatures up to 315°C.

 
 
 
  • No solvents;
    Does not run;
    High adhesion.

     
     

Surface Preparation
The surface must be dry, clean, and free of dust and oils. Remove all material residues, especially those not sufficiently adhered to the layers (sand if necessary). Clean and degrease the surface with isopropyl alcohol and keep it dry before application. Do not use kerosene or gasoline to clean the surfaces. For a better finish, it is recommended to use adhesive tape on the sides of the joint where product contact is not desired. For applications on substrates other than those mentioned, it is recommended to perform a test to assess product adhesion and compatibility.

Application and Curing Time
Apply the product to the desired area and immediately finish the surface. If using adhesive tape, remove it before the film forms. After use, leave a small amount of product above the nozzle to form a plug. When reusing, remove the plug. After opening, reuse the product within one week. Clean tools before curing. Once cured, the product can only be removed mechanically.

Storage
The product must be kept in its original packaging and stored in a cool place at temperatures between 5 and 30°C, protected from direct sunlight and away from heat sources. To avoid contamination of unused product, do not return any leftover material to its original packaging.

Keep out of reach of children and pets.
Shelf life (from the manufacturing date): 13 months.

Usage Restrictions

Do not use on painted surfaces or aquariums. Do not apply on plastics based on polyethylene, polypropylene, polycarbonate, acrylic, and polytetrafluoroethylene. Do not use on parts that will have contact with food or continuous immersion in liquids. Do not use on glass façades or any structural bonding that requires resistance. Not paintable.

PRODUTOS RELACIONADOS

High Temperature Acetic Silicone Red Blister 50ml