Ideal for bonding and sealing aquariums, terrariums, and cold chambers.

The surface must be clean and dry. Remove all residue, especially materials that are not properly adhered (sand if necessary). Clean and degrease the surface with isopropyl alcohol and keep it dry before application.

Do not use kerosene or gasoline to clean the surfaces. For a better finish, it is recommended to use masking tape on the sides of the joint where product contact is not desired. In case of application on substrates other than those mentioned, it is advisable to perform a test to assess adhesion and product compatibility.

Apply the product to the desired area and finish immediately. If using masking tape, remove it before a skin forms.