Excellent finish and coverage on various surfaces, such as metal, wood, ceramic, plaster, and others. Thanks to its high resistance to weathering, it is suitable for both indoor and outdoor environments.

Surface Preparation
The surface to be painted must be clean, dry, and free from dirt (dust, wax, grease, oil, etc.) and residues (old paint, rust, etc.). For absorbent surfaces, apply a primer beforehand.

Directions for Use
Important: wear a mask with an organic vapor filter, safety goggles, and PVC gloves during application. Before use, test the nozzle by pressing it a few times on any surface to check the spray pattern. To avoid dripping, apply a very light first coat. Shake the can well in circular motions before and during use. Spray from a distance of 25 cm using steady, even movements.
After application, clean the nozzle by turning the can upside down and pressing until only gas comes out. If the nozzle becomes clogged, remove it and soak it in thinner or acetone. If necessary, clear the opening with a needle.