- Cleans air conditioning and ventilation systems;
- Applied as a mist;Does not damage electrical components;
- No specialized labor required;
- Quick release inside the vehicle;
- Effective at eliminating odors.
Product Code: 0534.0045
Have you ever stopped to think about the last time you cleaned and sanitized your air conditioner? Whether in traffic or at home, air conditioner use is becoming more frequent, especially on hotter days. And just as important as setting the right temperature is ensuring the cleaning and sanitization of the units. With Unipega Air Conditioner Cleaner, this task becomes easy and super simple. Just activate the automatic valve and let the product do its job. Recommended for the interior of cars, buses, trucks, agricultural machinery, or any other environment that requires air conditioning system cleaning.
Usage Indications:
Unipega Air Conditioner Cleaner was developed for quick and simple cleaning of ducts, ventilation systems, and internal parts of vehicles in general. Also suitable for cleaning wall-mounted or split air conditioners. Featuring a modern cleaning concept, the product has a special valve that locks after activation and automatically releases the product, effectively cleaning the air conditioner and leaving a pleasant fragrance. Recommended for use inside cars, buses, trucks, agricultural machinery, or any other environment needing air conditioning system cleaning.
Preparation:
The surface must be dry, clean, and free of dust and oils. Remove all material residues, especially those not well adhered to the layers (sand if necessary). Clean and degrease the surface with isopropyl alcohol and keep it dry before application. Do not use kerosene or gasoline for surface cleaning. For a better finish, it is recommended to use masking tape on the sides of the joint where contact with the product is not desired. For applications on substrates other than those mentioned, it is advisable to perform a test to assess adhesion and product compatibility.
Application:
Only start the application if you fully understand all steps, or seek a specialized professional.
Before applying the product, replace the pollen filter (if the vehicle has one).
Remove rubber mats. Remove objects from the vehicle interior, such as cell phones, walkie-talkies, and other portable electronics, including from the glove compartment, consoles, and door-side compartments.
Keep all windows (front and rear) open 5 to 10 cm. Important: Never start the product application with windows closed to avoid gas pressurization inside the vehicle.
Start the vehicle.
With the engine running (idle), set the air conditioning system to recirculation mode.
Turn on the air conditioner to cold mode at maximum power.
Open all air vents.
Shake the can and place it on the passenger-side floor. Press the valve until it locks, then exit the vehicle and close the door. Maintain a safe distance from the vehicle (at least 6 meters).
Wait for the application to finish (approximately 2 minutes) and wait 15 minutes before entering the vehicle.
Turn off the vehicle, open all windows and doors, and wait another 15 minutes before using the vehicle.
Storage:
The product must be kept in its original packaging and stored in a cool place at temperatures between 5°C and 30°C, protected from direct sunlight and away from heat sources, with the packaging always kept upright. Do not expose to sunlight or temperatures above 50°C. Avoid leaving the product inside vehicles. Keep out of reach of children and pets.
We are a global brand present for over 20 years throughout Latin America, offering products for the construction, crafts, furniture, automotive and consumer sectors.
By Duoeme
